94% Undensified Microsilica (실리카 연료) 94유


94% 결정되지 않은 실리카 연료 (94유) is a highly effective supplementary cementitious material derived from the byproduct of silicon and ferrosilicon alloy production. It contains approximately 94% amorphous silica (sio2) and possesses exceptional physical and chemical properties that make it a valuable addition to various construction materials, especially concrete and cement-based products.

With a low bulk density ranging from 250 에게 350 kg/m3, 94% Undensified Silica Fume is lightweight and easy to handle, resulting in reduced transportation costs. Its specific surface area, typically between 15,000 and 30,000 M2/kg, allows for a high pozzolanic reactivity that enhances the mechanical and durability properties of the final products.

Features


  • Increased compressive and flexural strength
  • Reduced permeability and water ingress
  • Enhanced resistance to chemical attack and abrasion
  • Improved long-term performance and durability
  • Lightweight and easy to handle
  • Cost-effective and environmentally friendly

Application


  • High-performance concrete (HPC)
  • Precast and prestressed concrete elements
  • Shotcrete for tunnel linings and slope stabilization
  • Self-compacting concrete (SCC)
  • Fiber-reinforced concrete (FRC)
  • Repair and rehabilitation of damaged structures
  • Oil well cementing and grouting
  • Refractory materials for high-temperature applications
  • High-quality ceramics, coatings, and polymers
  • Green and sustainable building materials

매개 변수


재산
sio2 (이산화 실리콘, Amorphous)94% min
Al2O3 (산화 알루미늄)Typical 0.55%
Fe2O3 (산화철)Typical 0.16%
카오 (산화 칼슘)Typical 0.38%
MGO (산화 마그네슘)Typical 0.58%
K2O (산화 칼륨)Typical 1.24%
Na2O (산수 나트륨)Typical 0.29%
LOI (Loss on Ignition)4% max
Moisture3% max, Typical 0.52%
Retained on 45 micron sieve10% max, Typical 1.03%
벌크 밀도250-350 kg/m3
pH6-8
Fluidity> 18 cm
Specific surface (BET)18 m2/gram min

FAQ


  • 10kg 가용성 종이 봉지 x 84 팔레트에.
  • 20kg 가용성 종이 봉지 x 42 팔레트에.
  • 950kg 플라스틱 직조 가방 x 2 팔레트에(하단 주둥이가 있거나없는)
  • 1000kg 플라스틱 직조 가방 x 2 팔레트에(하단 주둥이가 있거나없는 )
  • 500kg 플라스틱 직조 가방 x 2 팔레트에 (하단 주둥이가 있거나없는 )
  • 미국 - ASTM C1240
  • 캐나다 - CSA A23.5
  • 유럽 연합 - En 13263
  • 중국 -GB/T 18736
  • 일본 - JIS a 6207
  • 브라질 - ABNT NBR 13956
  • 한국 - KS f 2567
  • 베트남 -TCVN 9395
  • 인도 - IS 15388

실리카 연료 비용은 여러 요인에 의해 영향을받습니다., SIO2 함량과 같은, 물류 운송 비용, 노동 비용, ect. 일반적으로, 실리카 연료의 가격은의 범위입니다 $150 에게 $800 메트릭 톤당. 하지만, 가격은 때때로 고품질 의이 범위를 초과 할 수 있습니다, 특수 제품 또는 소규모 주문, 이는 가격이 변경되었음을 의미합니다, 그래서 우리는 온라인 따옴표를 제공 할 수 없습니다. 요구 사항을 보내 후에도 자세한 인용문을 보내드립니다..

실리카 Fume과 플라이 애쉬는 콘크리트의 성능을 향상시킬 수있는 보충 시멘트 재료입니다. 실리카 연료는 비정질 실리카의 매우 미세한 입자로 구성됩니다., 플라이 애쉬는 석탄 연소의 부산물이며 무기 물질의 작은 구형 입자로 구성됩니다.. 실리카 연료 입자는 플라이 애쉬 입자보다 훨씬 작습니다., 그리고 일반적으로 플라이 애쉬보다 더 반응성이 높은 포졸란으로 간주됩니다.. 실리카 연료는 초기에 콘크리트의 압축 강도를 향상시키는 것으로 알려져 있습니다., 플라이 애쉬는 일반적으로 콘크리트의 장기 강도와 내구성을 향상시키는 데 사용됩니다.. 사용해야 할 자료의 선택은 사용중인 콘크리트의 특정 응용 및 성능 요구 사항에 따라 달라집니다..

저희에게 연락하십시오

무료 인용문을 받으십시오

설립 2001, HSA, 또한 콘크리트 및 연마 산업을위한 고성능 제품의 프리미엄 소스.

비슷한 게시물