94% Undensified Microsilica (Silica Fume) 94U
94% Fumée de silice non densifiée (94U) is a highly effective supplementary cementitious material derived from the byproduct of silicon and ferrosilicon alloy production. It contains approximately 94% amorphous silica (SiO2) and possesses exceptional physical and chemical properties that make it a valuable addition to various construction materials, especially concrete and cement-based products.
With a low bulk density ranging from 250 à 350 kg/m3, 94% Undensified Silica Fume is lightweight and easy to handle, resulting in reduced transportation costs. Its specific surface area, typically between 15,000 et 30,000 m2/kg, allows for a high pozzolanic reactivity that enhances the mechanical and durability properties of the final products.
Request Custom Quote
Features
- Increased compressive and flexural strength
- Reduced permeability and water ingress
- Enhanced resistance to chemical attack and abrasion
- Improved long-term performance and durability
- Lightweight and easy to handle
- Cost-effective and environmentally friendly
Application
- High-performance concrete (HPC)
- Precast and prestressed concrete elements
- Shotcrete for tunnel linings and slope stabilization
- Self-compacting concrete (SCC)
- Fiber-reinforced concrete (FRC)
- Repair and rehabilitation of damaged structures
- Oil well cementing and grouting
- Refractory materials for high-temperature applications
- High-quality ceramics, revêtements, and polymers
- Green and sustainable building materials
Paramètres
Propriété | Value |
---|---|
SiO2 (Silicon Dioxide, Amorphous) | 94% min |
Al2O3 (Aluminum Oxide) | Typical 0.55% |
Fe2O3 (Iron Oxide) | Typical 0.16% |
CaO (Calcium Oxide) | Typical 0.38% |
MgO (Magnesium Oxide) | Typical 0.58% |
K2O (Potassium Oxide) | Typical 1.24% |
Na2O (Sodium Oxide) | Typical 0.29% |
LOI (Loss on Ignition) | 4% max |
Moisture | 3% max, Typical 0.52% |
Retained on 45 micron sieve | 10% max, Typical 1.03% |
Bulk Density | 250-350 kg/m3 |
pH | 6-8 |
Fluidity | > 18 cm |
Specific surface (BET) | 18 m2/gram min |
FAQ
Contactez-nous
Obtenez un devis gratuit
Fondé en 2001, HSA est l'un des principaux fournisseurs de fumées de silice et d'abrasifs en Chine, et également la source premium de produits hautes performances pour les industries du béton et des abrasifs.